SKF鼓形滚子轴承能够适应重载和错位
作者：高可 | 来源： | 时间：
The SKF Carb torodial roller bearings serve as non-located bearing in large electric motors (125 Hp and above) with their capability to accomodate very heavy radial loads and compensate for misalignment.
SKF CARB鼓形滚子轴承是使用于大型电动机（125马力及以上）中的非定位轴承，能够承受非常重的径向载荷并补偿错位。
The bearings are suitable for coupled and belted loads and provide users with a single bearing solution for motors regardless of mounting method.
该系列轴承适用于耦合和带式负载，为用户提供适用于电机的针对性轴承解决方案，可忽略轴承的安装方法差异。
Self-aligning roller bearings combine design features from several types of bearings, according to the company’s press release.
根据该公司的新闻稿，调心滚子轴承结合了几种轴承的设计特点。
CARB bearings can adjust for axial expansion of the shaft internally, similar to a cylindrical roller bearing. These bearings, like spherical roller bearings, can accomodate misalignment as well. Long self-guiding rollers maximize load capacity, similar to needle roller bearings.
CARB轴承可以调节轴内部的轴向膨胀，类似于圆柱滚子轴承。和调心滚子轴承一样，CARB轴承也可以调节错位。与滚针轴承类似，CARB轴承长的自导向滚子最大限度地提高了承载能力。
A special design of the rollers allows CARB bearings to reduce the potential for skidding on the raceways.
得益于滚子的特殊设计，CARB轴承能够有效减少在滚道上打滑的可能性。
In addition, the bearings improve lubrication conditions, extend relubrication intervals and improve grease life, all with minimal maintenance.
此外，轴承改善了润滑条件，延长了再润滑间隔，延长了润滑脂使用寿命，所有这些都只需要最少的维护。